ARSEL ELECTRONICS LTD.
 
 

Central Adress:
Gursel mah. Gozlem sok. no:8/B
Kagithane - Istanbul/Turkey

Tel    : +90 212 210 76 50
Fax   : +90 212 210 48 32
info@arselelektronik.com.tr

         
PHOTOLUMINESCENT AND REFLECTIVE PRODUCTS

Glowing phosphor plates
fosforlu levha
3 D work safety warning signs
3 ebatlı levhalar
Hazardous material handling labels
teklikeli madde uyarı
Photoluminescent strips
fotoluminesan şeritler

Phosphoric ground paint
fosforlu boya
Photoluminescent folios    
fotoluminesan folyo
 
   As a result of electric cuts and fires in the made analysis, it is seen that the escape and emergency exit doors were not marked as correct and properly. In these cases the route of the not cut escape systems shall be guiding the person in danger by inevitably emerge from the building.
By reason of the emergency situations people need to evacuate the factories, offices, hospitals, schools, work places easily, if necessary having no electricity convert this emergency situation to a disaster that will lead to loss of life and property.Decition of a fast and quickly escape evacuation in every where people located collectively is a matter of time expressed in seconds. Interruption of the light source or limitation of the possibility of viewing may give way to unnecessary panic and confusion.
   In the event of fire the smoke comes up to upwards. The smoke can cover the emergency lightings mounted too high. But it is easy to notice the strips mounted close to the ground. The emergency situation directions (escape direction) must be marked with arrows and with pictures. They immediately draw attention to danger. The ridges, corners and columns in front of the eye and all the other areas that can pose a danger must be marked.Mechanisms and machines, door entrances steps, low narrow corridors, control panels, elevator cabs and safety equipments must be equipped with fluorescent products.
   Photoluminescent: The luminescent material stores the light energy by absorbing it and after that it gradually reflects.
   The natural and artificial lighting sources act as the charging for this material. In the event of sudden interruption of lights and other electrical circuits, it provides people to find their ways easily in dark environment. In this way the dark corridors, passages and stairs can be passed easily.
   In addition there can be a small time pass when the electricity is cut and the other power sources are being activated. (Some emergency lightings activate after 10 seconds.) This situation supports glowing fluorescent emergency lighting. It ensures convenience at direction determination. It can be activated in an infinite number. It doesn’t contain poison and radiation. It is not fluorescent and it is not reflective.
 Arsel Electronics and Security Systems Ind. Trade Ltd. Company.
info@arselelektronik.com.tr
 
   
Arsel Elektronik ltd..